Panasonic WJ-NT204 User Manual
Page 116
117
q
WJ-NT204 CAMERA SELECT
These buttons select the input to VIDEO IN 1-4 on the
WJ-NT204 to display it in the Image Display area.
w
INPUT from FRAME SWITCHER
Displays the image supplied from the video multiplexer,
and opens the 16-button panel where you can select
the input to the video multiplexer.
e
ALARM LIST (WJ-NT204)
Opens the alarm list activated on the WJ-NT204 trans-
mitter.
r
ALARM RESET
Resets the alarm mode.
t
WJ-NT204 CAMERA PRESET REGISTRATION
Registers the presently displayed image position of the
camera connected to the WJ-NT204. Manipulate the
camera to the desired position, then select the preset
number with the pull-down button. Click the SET button
to register the position.
y
CAMERA CONTROL Buttons
Controls the Combination camera designated with WJ-
NT204 CAMERA SELECT button for pan/tilt, zoom,
focus and auto-pan.
u
Status Window
Displays alarm information when an alarm is activated.
i
Image Display
Displays the camera image or multiscreen.
q
e
w
r
y
u
t
i