Panasonic WJ-NT204 - Manual (Page 55)

55
• Dialog Screen
There are several dialogs that appear during normal opera-
tions: YES/NO inquiry, etc. The major operations are
explained on the bottom half of the screen. For further
details, see MAJOR CONTROLS AND THEIR FUNCTIONS.
■ To Call a Site
There are some dialing methods to call a site.
1. Direct entry of the destination IP address with the
numeric buttons
2. Using the registered Quick dialing directory
3. Using the registered One-touch dialing directory
4. Sequential dialing in the preset order
● Direct Dialing
This is the most basic way to call a site.
1. Press the DIAL button.
The DIRECT DIAL dialog appears.
2. Enter the IP address of the site you wish to call, with the
numeric buttons.
3 When you entered a wrong number, press the DELETE
button. The number followed by the cursor will be
erased.
4. Press the CALL button. The dialog screen changes to
“CONNECTING” and the unit starts dialing.
DIRECT DIAL
IP ADDRESS:
. . .
ENTER IP ADDRESS,THEN PRESS CALL
KEY,DIALING.
←→
:MOVE CALL:CALL DEL:NO.CLEAR
ONE TOUCH DIAL:CALL
REDIAL:REDIAL NO. DIAL/ESC:CLEAR
ESC
MENU
AF NEAR FAR TELE WIDE
Remote Controller WV-CU20
1 2 3
4 5 6
7 8
0
9
1 2 3 4 5
#
STEP 1
DIAL
PRESET SET
QUICK
STEP 2 STEP 3
CALL
REDIAL
DELETE
ENTER
AUDIO MUTE
ALM ACK VIDEO SWITCH ONE TOUCH DIAL
AUTO/MANU SITE
DIRECT DIAL
IP ADDRESS:
. . .
ENTER IP ADDRESS,THEN PRESS CALL
KEY,DIALING.
←→
:MOVE CALL:CALL DEL:NO.CLEAR
ONE TOUCH DIAL:CALL
REDIAL:REDIAL NO. DIAL/ESC:CLEAR
DIRECT DIAL
IP ADDRESS:
192.168. 0. 11
ENTER IP ADDRESS,THEN PRESS CALL
KEY,DIALING.
←→
:MOVE CALL:CALL DEL:NO.CLEAR
ONE TOUCH DIAL:CALL
REDIAL:REDIAL NO. DIAL/ESC:CLEAR
DIRECT DIALING
IP ADDRESS:
192.168. 0. 11
DIAL/ESC:CANCEL
CONNECTING
1
2
4
3
5