Panasonic WJ-NT204 - Manual (Page 75)

76
■ Main Page (with Camera Control)
This page appears when a user authorized level 2 or higher made access, and the MODE SETUP is set as follows.
MODE SETUP
CAM CONTROL: OTHERS
AUX SYSTEM: NT204
● Random Input Selection Mode
q INPUT SELECT
These buttons are used to switch images of up to four
cameras.
w PRESET SELECT
To move the combination camera (option) connected to
the WJ-NT204 to any of 8 preset positions.
To register preset positions refer to the CAMERA
SETUP MENU on page 91.
e ALARM LIST
Camera video input before and after alarm input can
be temporarily stored in the internal memory of the WJ-
NT204.
For alarm display see ALARM LIST on page 78.
r ALARM RESET
Click this to reset the activated alarm mode. The alarm
information will disappear in the STATUS window.
t CAMERA PRESET REGISTRATION
Preset registration can be made for the Combination
camera connected to the WJ-NT204 as follows.
While displaying the desired image position, select the
position number, then press the SET button.
y PAN/TILT
Click on any of the pan/tilt buttons: Up, Down, Right or
Left to move the pan/tilt head of the Combination cam-
era to the desired direction. Click the button repeatedly
as necessary not holding down it.
u ZOOM
Click the button to zoom in or out. Instead holding
down the button, click on it repeatedly as necessary.
TELE: Zooms in the image.
WIDE: Zooms out the image.
i FOCUS
Click NEAR or FAR to adjust the focus of the image
manually. Instead holding down the button, click on it
repeatedly as necessary.
NEAR: Manual focusing
FAR: Manual focusing
AUTO: The built-in focus mechanism performs in the
Combination camera.
q
w
e
r
t
!2
!3
y u o !1 i !0