Panasonic WJ-NT204 - Manual (Page 19)

19
■ On the Remote Site (Transmitter)
Procure cables and connectors locally, when they are not supplied as standard accessories. For details on connections, refer
to the manual provided with the device.
● Audio/Video Connection on the Remote Site
1. Camera Connections
Connect the VIDEO IN terminals 1 through 4 to a maximum of 4 Combination cameras or ordinary cameras with coaxial
cables and BNC connectors. When an audio input is available, connect it to the AUDIO IN/OUT terminal using an audio
cable with the RCA plug.
SIGNAL GND
AC IN
RS–232C RS–485
4
4
3
3
2
2
1
1
AUX I N
REMOTE SETUP HOST PORT DATA PORT DATA PORT 10BASE-T/100BASE-TX
OUT
OUT
OUT
I N
I N SENSOR IN/TRIGGER OUT PARALLEL PORT
VIDEO MON/SPOT AUDIO
Combination Camera
or Ordinary Camera
Microphone
Amplifier
VIDEO IN 1 2 3 4 AUDIO IN
See page 29.
See page 24 - 26.
To CCTV devices
See page 19 - 23, 29.
See page 29.
See page 27, 28.
Network Interface Unit
(Transmitter)
Amplifier
Speaker