Panasonic WJ-NT204 - Manual (Page 90)

91
■ CAMERA SETUP MENU
On the ADMINISTRATOR SETUP PAGE , click the CAMERA MENU button to display the CAMERA SETUP MENU window.
The cameras (option) can be set by remote control from this page.
For the individual functions of the camera menu, refer to the operating instructions for the camera.
q CAMERA SELECT
These buttons select any of the cameras connected.
w MENU ON/OFF
These buttons open or close the CAMERA MENU .
e ESC
Clicking this button escapes from the current selection
and returns the
CAMERA MENU to the previous page.
r MOVE CURSOR - Left
To move the cursor to the left. Use to change settings
or adjust levels.
MOVE CURSOR - Up
To move the cursor up.
MOVE CURSOR - Down
To move the cursor down.
MOVE CURSOR - Right
To move the cursor to the right. Use to change settings
or adjust levels.
t SET
To execute the currently selected settings or to enter a
submenu of the
CAMERA MENU .
y ALL RESET
To reset all camera settings to the factory defaults,
click this button when the cursor is positioned on the
CAMERA RESET in the SPECIAL MENU.
u RESET
To reset individual parameters to the factory defaults.
Clicking this button will enter the SPECIAL MENU when
the cursor is positioned on the SPECIAL in the menu.
i FOCUS
NEAR:
Manual focusing
FAR: Manual focusing
AUTO: The built-in focus mechanism performs in the
Combination camera.
o ZOOM
TELE:
Zooms in the image.
WIDE: Zooms out the image.
!0 PAN/TILT
Click on any of the pan/tilt buttons: Up, Down, Right or
Left to move the pan/tilt head of the Combination cam-
era to the desired direction. Click the button repeatedly
as necessary not holding down it.
!1 Live Image & Camera Setup Menu Display
The camera setup menu is overlaid on the live image
when the MENU ON button is clicked.
q w
y u i o
!1
!0
e r t