Panasonic WJ-NT204 - Manual (Page 24)

24
● Control Device Connection on the Remote Site
1. SENSOR IN/TRIGGER OUT Connections
Two connection examples are shown in this page, but there may be more applications. Consult the manuals included in
the equipment for the system configuration you need.
<First example>
In the first example, a sensor input lets the Network Interface Unit supply the sensor-related camera picture to the
MON/SPOT terminal. Sensor input signals are relayed to the trigger out terminals. A TRIGGER OUT lets the Digital Disk
Recorder enter the Alarm recording in that the sensor-related images are recorded.
See page 26 for electrical specifications.
TRIGGER OUT 8
q
!4 !5 !6 !7 !8 !9 @0 @1 @2 @3 @4 @5
w e r t y u i o !0 !1 !2 !3
TRIGGER OUT 6
TRIGGER OUT 7
TRIGGER OUT 4 TRIGGER OUT 2
G
N
D
G
N
D
TRIGGER OUT 5 TRIGGER OUT 3 TRIGGER OUT 1
SENSOR IN 8 SENSOR IN 7 SENSOR IN 6 SENSOR IN 5 SENSOR IN 4 SENSOR IN 3 SENSOR IN 2 SENSOR IN 1
ALARM
RECALL OUT RECOVER OUT RESET IN IN G
Digital Disk Recorder
Sensor
Network Interface Unit