Planet Technology WGSD-8000 - Manual (Page 134)

User’s Manual of WGSD-1022/WGSD-8000
- 134 –
• Filter Type Indicates if informs or traps are sent regarding the OID to the trap recipients.
• Excluded
Restricts sending OID traps or informs
• Included Sends OID traps or informs.
Use the button when you want to add the Notification Filter configuration to the Notification Filter Table at
the bottom of the screen.
4.11.7 Notification Recipient
The Notification Recipient screen (see figure 4-66 and 4-67) contains information for defining filters that determine whether traps
are sent to specific users, and the trap type sent.
Figure 4-66 Notification Recipient
The page contains the following fields:
• Recipient IP Which indicates the IP address to whom the traps are sent.
• Notification Type Defines the notification sent. The possible field values are:
Traps, indicates traps are sent.
Informs, indicates informs are sent.
• SNMP v1.2 Enables SNMP v1.2 as the Notification Recipient. Either SNMP v1.2 or SNMPv3
can be enabled at any one time, but not both at the same time. If String and
Notification Version fields are enabled for configuration:
• Community String, where identifies the community string of the trap manager.
• Notification Version, determines the trap type. The possible field values are: