2 rack mounting – Planet Technology WGSD-8000 User Manual
Page 21
User’s Manual of WGSD-1022/WGSD-8000
- 21 –
2.2.2 Rack Mounting
To install the switch in a 19-inch standard rack, please follows the instructions described below.
Step1
: Place the switch on a hard flat surface, with the front panel positioned towards the front side.
Step2
: Attach the rack-mount bracket to each side of the switch with supplied screws attached to the package. Figure 2-5 shows
how to attach brackets to one side of the switch.
Figure 2-5
Attach brackets to the switch.
Caution:
You must use the screws supplied with the mounting brackets. Damage caused to the parts by using incorrect screws
would invalidate the warranty.
Step3
: Secure the brackets tightly.
Step4
: Follow the same steps to attach the second bracket to the opposite side.
Step5
: After the brackets are attached to the Switch, use suitable screws to securely attach the brackets to the rack, as shown in
Figure 2-6
Figure 2-6
Mounting the Switch in a Rack