Planet Technology WGSD-8000 - Manual (Page 16)

User’s Manual of WGSD-1022/WGSD-8000
- 16 –
WEB-Based, Telnet, Console Command Line management
SSH( Secure Shell), SSL
Access through SNMPv1,v2c and v3 security set and get requests.
Four groups (history, statistics, alarms, and events) of embedded remote monitoring (RMON) agents for network
monitoring and traffic analysis
Built-in Trivial File Transfer Protocol (TFTP) client
Virtual Cable Test (VCT) technology provides the mechanism to detect and report potential cabling issues, such as
cable opens, cable shorts, etc. on Copper Links
EMI standards comply with FCC, CE class A, WEEE RoHS
Product Specification
Product WGSD-1022 WGSD-8000
Description
8-Port 10/100Mbps + 2 Gigabit TP / SFP
combo Managed Ethernet Switch
8-Port 10/100/1000Mbps with 2 shared
SFP Managed Ethernet Switch
Hardware Specification
10/100Base-TX Ports 8 RJ-45 Auto-MDI/MDI-X ports ---
10/100/1000Base-T Ports 2 RJ-45 Auto-MDI/MDI-X ports 8 RJ-45 Auto-MDI/MDI-X ports
SFP/mini-GBIC Slots
2 SFP interfaces
( Shared with Port-9 and Port-10 ) 2 SFP interfaces
( Shared with Port-7 and Port-8 )
Switch Architecture Store-and-forward
Switch Fabric 5.6Gbps / Non-Blocking 16Gbps / Non-Blocking
Switch Throughput 4.17Mpps / Wire-Speed 11.9Mpps / Wire-Speed
Address Table 8K entries
Share data Buffer 1 Mbit
Flow Control Back pressure for Half-Duplex, IEEE 802.3x Pause Frame for Full-Duplex
Jumbo Frame 9K bytes per 10/100/1000Base-T Ports
Dimension 267 x 170 x 45mm (W x D x H), 1U height
Weight 1.2 KG
Power Requirement 100~240V AC, 50-60, Auto-sensing
Layer 2 function
Management Interface Console. Telnet, SSH, Web Browser, SSL, SNMPv1, v2c and v3
Port configuration
Port disable/enable. Auto-negotiation 10/100Mbps full and half duplex mode selection.
Flow Control disable / enable.
Bandwidth control on each port.