Planet Technology WGSD-8000 - Manual (Page 138)

User’s Manual of WGSD-1022/WGSD-8000
- 138 –
• Local, authenticates the user at the device level. The device
checks the user name and password for authentication.
• RADIUS, where authenticates the user at the RADIUS server.
• TACACS+, which authenticates the user at the TACACS+ server.
• None, assigns none authentication method to the authentication
profile.
• User Name Displays the user name.
• Password Specifies the new password. The password is not displayed. As it
entered an “*” corresponding to each character is displayed in the
field. (Range: 1-159 characters)
• Confirm Password This confirms the new password. The password entered into this field
must be exactly the same
as the password entered in the Password field.
Use the button when you want to add the user configuration to the Local User’s Table.
4.12.2 Static Address
A static address can be assigned to a specific interface on this switch. Static addresses are bound to the assigned interface and
cannot be moved. When a static address is seen on another interface, the address will be ignored and will not be written to the
address table (see figure 4-69)
Figure 4-69 Static Address screen
The page contains the following fields:
• Interface Displays the interface to which the entry refers:
• Port, to which the specific port number the forwarding database