6 configuration and image files, 1 copy, User guidelines – Planet Technology WGSD-8000 User Manual
Page 195: Examples, Syntax
User’s Manual of WGSD-1022/WGSD-8000
- 195 –
User Guidelines
There are no user guidelines for this command.
Examples
The following example shows the status of the SNTP.
Console# show sntp status
Clock is synchronized, stratum 4, reference is 176.1.1.8
Reference time is AFE2525E.70597B34 (00:10:22.438 PDT Jul 5 1993)
Unicast servers:
Server Preference Status Last response Offset Delay
[mSec] [mSec]
----------- ----------------- ----------- ---------------------- ----------- ------------
176.1.1.8 Primary Up AFE252C1.6DBDDFF2 7.33 117.79
176.1.8.179 Secondary Unknown AFE21789.643287C9 8.98 189.19
Broadcast:
Interface IP address Last response
------------- ----------------- ------------------------
176.1.1.8 Primary AFE252C1.6DBDDFF2
176.1.8.179 Secondary AFE21789.643287C9
5.6 Configuration and Image Files
5.6.1 copy
The copy privileged EXEC command copies files from a source to a destination.
Syntax
copy source-url destination-url
[snmp]
source-url — The source file location URL or reserved keyword being copied.
destination-url — The destination file URL or reserved keyword.
snmp — Used only when copying from /to startup-config. Specifies that the destination/source file is inSNMP format.
The following table displays keywords aliases to URL: