Planet Technology WGSD-8000 - Manual (Page 322)

User’s Manual of WGSD-1022/WGSD-8000
- 322 –
Example
The following example displays information about the active users.
Console# show users
Username Protocol Location
---------------- ------------ ------------
Bob Serial
John SSH 172.16.0.1
Robert HTTP 172.16.0.8
5.23.8 show sessions
The show sessions command in EXEC mode lists the open Telnet sessions.
Syntax
show sessions
This command has no arguments or keywords.
Default Configuration
There is no default configuration for this command.
Command Mode
EXEC mode
User Guidelines
There are no user guidelines for this command.
Examples
The following table describes the significant fields shown in the display:
Console> show sessions
Connection Host Address Port Byte
---------------- ------------- ------------- -------- -------
1 Remote router 172.16.1.1 23 89
2 172.16.1.2 172.16.1.2 23 8
Field Description
Connection Connection number
Host Remote host to which the device is connected through a Telnet session.