Command structure, 1 connect to pc’s rs-232 serial port, 2 using the cli – Planet Technology WGSD-8000 User Manual
Page 153: 1 cli command modes
User’s Manual of WGSD-1022/WGSD-8000
- 153 –
5. COMMAND STRUCTURE
The WGSD-Switch is a managed Ethernet Switch that can be controlled by the RS-232 console interface, telnet interface, and
Web interface. This chapter describer how to configure the Switch through these interfaces.
When you are ready to configure the smart functions of the Switch, make sure you had connected the supplied RS-232 serial
cable to the RS-232 port at the front panel of your WGSW-24010 Switch and your PC.
5.1 Connect to PC’s RS-232 serial port
Hyper Terminal
In Windows 98/2000/XP, launch “HyperTerminal”, create a new connection, and adjust settings as below:
Baud per second: 38400
Data
bits: 8
Parity:
None
Stop
bits: 1
Flow
Control: None
5.2 Using the CLI
5.2.1 CLI Command Modes