18 show ports security, 5 clock commands, Syntax – Planet Technology WGSD-8000 User Manual
Page 182: Default configuration, Command mode, User guidelines, Example
User’s Manual of WGSD-1022/WGSD-8000
- 182 –
console # show bridge multicast filtering 1
Filtering: Enabled
VLAN: 1
Forward-All
Port Static Status
--------- ------------ -----------
e1 Forbidden Filter
e2 Forward Forward(s)
e3 - Forward(d)
5.4.18 show ports security
The show ports security privileged EXEC command displays the port-lock status.
Syntax
show ports security
[ethernet interface | port-channel port-channel-number]
interface — A valid Ethernet port.
port-channel-number — A valid port-channel number.
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
There are no user guidelines for this command.
Example
In this example, all classes of entries in the port-lock status are displayed.
console# show ports security
Port status Learning Action Maximum Trap Frequency
------- -------- ------------- ----------------- --------- -------- ---------
e1 Disabled Lock - 1 - -
e2 Disabled Lock - 1 - -
e3 Disabled Lock - 1 - -
e4 Disabled Lock - 1 - -