Planet Technology WGSD-8000 - Manual (Page 313)

User’s Manual of WGSD-1022/WGSD-8000
- 313 –
ƒ username — Specifies the remote SSH client username.
ƒ bubble-babble — Fingerprints in Bubble Babble format.
ƒ hex — Fingerprint in Hex format. If fingerprint is unspecified, it defaults to Hex format.
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
There are no user guidelines for this command.
Examples
The following example displays all SSH public keys stored on the device.
Console# show crypto key pubkey-chain ssh
Username Fingerprint
---------------- -----------------------------------------------
bob 9A:CC:01:C5:78:39:27:86:79:CC:23:C5:98:59:F1:86
john 98:F7:6E:28:F2:79:87:C8:18:F8:88:CC:F8:89:87:C8
The following example displays the SSH public called "bob".
Console# show crypto key pubkey-chain ssh username bob
Username: bob
Key: 005C300D 06092A86
5.23 System Management
5.23.1 ping
The ping user EXEC command sends ICMP echo request packets to another node on the network.
Syntax
ping ip-address | hostname [size packet_size] [count packet_count] [timeout time_out]
ƒ ip-address — IP address to ping. An out-of-band IP address can be specified as described in the usage guidelines.
ƒ hostname — hostname to ping (Range: 1 - 160 characters)