Planet Technology WGSD-8000 - Manual (Page 271)

User’s Manual of WGSD-1022/WGSD-8000
- 271 –
User Guidelines
There are no user guidelines for this command.
Example
The following example configures the number of times the software searches the list of RADIUS server hosts to 5 attempts.
Console (config)# radius-server retransmit 5
5.18.4 radius-server source-ip
The radius-server source-ip global configuration command specifies the source IP address used for communication with
RADIUS servers. To return to the default, use the no form of this command.
Syntax
radius-server source-ip source
no radius-server-ip
ƒ source — Specifies the source IP address.
Default Configuration
The default IP address is the outgoing IP interface.
Command Mode
Global Configuration mode
User Guidelines
To define an out-of-band IP address, use the out-of-band IP address format —oob/ip-address.
Example
The following example configures the source IP address used for communication with RADIUS servers to 10.1.1.1.
Console (config)# radius-server source-ip 10.1.1.1
5.18.5 radius-server timeout
The radius-server timeout global configuration command sets the interval for which a router waits for a server host to reply. To
restore the default, use the no form of this command.
Syntax
radius-server timeout timeout
no radius-server timeout