Planet Technology WGSD-8000 - Manual (Page 179)

User’s Manual of WGSD-1022/WGSD-8000
- 179 –
5.4.14 show bridge address-table static
The show bridge address-table static privileged EXEC command displays statically created entries in the bridge-forwarding
database.
Syntax
show bridge address-table static [vlan vlan] [ethernet interface | port-channel port-channel-number]
ƒ vlan — Specific valid VLAN, such as VLAN 1.
ƒ interface — A valid Ethernet port.
ƒ port-channel-number — A valid port-channel number.
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
There are no user guidelines for this command.
Example
In this example, all static entries in the bridge-forwarding database are displayed.
console# show bridge address-table static
Aging time is 300 sec
vlan mac address port type
------ -------------------- ------ -------
1 0060.704C.73FF e8 permanent
1 0060.708C.73FF e8 delete-on-timeout
200 0010.0D48.37FF e8 delete-on-reset
5.4.15 show bridge address-table count
The show bridge address-table count privileged EXEC command displays the number of addresses present in all VLANs or
at a specific VLAN.
Syntax
show bridge address-table count [vlan vlan]
ƒ vlan — Specific VLAN.