Planet Technology WGSD-8000 - Manual (Page 145)

User’s Manual of WGSD-1022/WGSD-8000
- 145 –
Figure 4-74 Save Configuration via TFTP
The page contains the following fields:
„ Via TFTP
• Via TFTP Upgrade Select this option to upgrade the switch from a file located on a TFTP
Server.
• TFTP Server The TFTP Server IP Address that contains the source file to upgrade
from.
• Source File Specifies the name of the upgrade file on the TFTP Server.
• Destination File Where specifies the name of the configuration file. The default is
StartupCfg.
„ Via HTTP
This HTTP Firmware Upgrade screen is used for saving configuration information using your Web browser. See figure 4-75
Figure 4-75 Save Configuration via HTTP
• Upgrade Select this option to upgrade the switch from a file on the local hard
drive.