Planet Technology WGSD-8000 - Manual (Page 342)

User’s Manual of WGSD-1022/WGSD-8000
- 342 –
Command Mode
Line Configuration mode
User Guidelines
There are no user guidelines for this command.
Example
The following example enables the command history function for telnet.
Console (config)# line telnet
Console (config-line)# history
5.26.10 history size
The history size line configuration command changes the command history buffer size for a particular line. To reset the
command history buffer size to the default, use the no form of this command.
Syntax
history size number-of-commands
no history size
ƒ number-of-commands—Number of commands that the system records in its history buffer. (Range: 10 - 216)
Default Configuration
The default history buffer size is 10.
Command Mode
Line Configuration mode
User Guidelines
There are no user guidelines for this command.
Example
The following example changes the command history buffer size to 100 entries for a particular line.
Console (config-line)# history size 100
5.26.12 show history
The show history user EXEC command lists the commands entered in the current session.