Paradyne 9128-II - Manual (Page 119)

3. Configuration
9128-A2-GB20-60 April 2002 3-85
Encapsulation
Possible Settings: Routed
Default Setting: Routed
This read-only field specifies that the IP encapsulation used is RFC 1490/RFC 2427
routed Network Level Protocol IDentifier (NLPID) encapsulation, and not SubNetwork
Access Protocol (SNAP) encapsulation.
Display Conditions – This option appears only if the PVC is IP Enabled or Payload
Managed is enabled.
Routed – IP encapsulation is routed NLPID.
Table 3-18. Management PVC Options (6 of 6)