Paradyne 9128-II - Manual (Page 337)

B. SNMP MIBs and Traps, and RMON Alarm Defaults
9128-A2-GB20-60 April 2002 B-15
enterpriseSelfTest-
Fail(2) T devLastTrapString
(devHealthAndStatus.-
mib) Unit has completed
(re)initialization and a hardware
failure was detected.
String:
‘Self test failed: $ s .’ ($ s is the
contents of devSelfTestResult.)
enterpriseTest-
Start(5) For physical interfaces and
frame relay links:
T ifIndex (RFC 1573)
T .0.0 (placeholder)
T devLastTrapString
(devHealthAndStatus.-
mib
For virtual circuits (DLCIs):
T devFrExtDlciIfIndex
(devFrExt.mib)
T devFrExtDlciDlci
(devFrExt.mib)
T devLastTrapString
(devHealthAndStatus.-
mib
At least one test has been started
on an interface or virtual circuit.
String:
‘$testString test started on
$ifString.’ (e.g., ‘DTE Loopback
test started on Sync Data Port
S01P1.’)
enterpriseTest-
Stop(105) All tests have been halted on an
interface or virtual circuit.
String:
‘$testString test stopped on
$ifString.’ (e.g., ‘Disruptive PVC
Loopback test stopped on DLCI
100 of Sync Data Port S01P1
frame relay.’)
Table B-7. enterprise-Specific Traps and Variable-Bindings (3 of 3)
Trap Variable-Bindings Possible Cause