Paradyne 9128-II - Manual (Page 300)

8. Setting Up NetScout Manager Plus for FrameSaver Devices
8-14 April 2002 9128-A2-GB20-60
Procedure
1. Open a terminal window and go to $NSHOME/usr.
2. Copy an example or interface-specific file to a new file that contains the user
history table number.
3. Open the new file using a text editor.
The variables in the file are listed with their OIDs (Object IDs). The frame relay
interface number 101015001 must replace @IFN, and the DLCI number to be
monitored must replace @DLCI.
Example: frCircuitSentFrames
Change “
1.3.6.1.2.1.10.32.2.1.6.@IFN.@DLCI ”
to “ 1.3.6.1.2.1.10.32.2.1.6.101015001.301 ”
The only valid interface number for a FrameSaver 9126 or 9128 is 101015001.
4. Edit the new file, as needed.
Refer to Creating .UDH Files and Using Custom History in the NetScout Manager
Plus User Guide for additional information.
See Appendix B, SNMP MIBs and Traps, and RMON Alarm Defaults , for OID
information for an interface.