Paradyne 9128-II - Manual (Page 387)

9128-A2-GB20-60 April 2002 IN-1
Index
Numerics
1MPort mode
auto-configuration, 3-14
1Port mode
auto-configuration, 3-14
1PPort mode
auto-configuration, 3-14
2MPorts mode
auto-configuration, 3-14
55 hexadecimal
test pattern, 6-24
A
aborting tests, 6-21
Access
Easy, 3-8
Level
Port, 3-104
Name, 3-86
to another devices interface, 5-69
Type, 3-91
Access Dial-In, 4-4
Access Level, 4-11–4-12
assigning, 4-10
Port, 3-101
security, 2-1
Session, 3-88
Action on Network Yellow Alarm, 3-46
activating Modem PassThru, 5-69
Activation
Certificate, 7-5
checking status, 7-7
entering number, 7-7
viewing status, 7-7
checking status, 7-9
managing, 7-6
scheduling, 7-8
SLV capability, 7-4
adding
SLV units to network, 9-3
AIS
alarm condition, 6-7
at DSX-1 or Network, 5-20
at ISDN PRI, 5-20
LED, 5-8, 5-10
linkDown trap, B-11
Alarm, 6-7
(Fail), 5-8–5-9
adding manually, 8-11
conditions, 6-2, 6-7
configurable thresholds, 1-8
editing, 8-9
LED is lit, 6-14
Relay
turning off, 5-80
RMON defaults, B-18
using template, 8-8
ALM LED, 5-8–5-10
Alternate
Dial-Out Directory, 3-96
IP Address, 3-106
Outbound Phone Number, 3-55
software revision, 5-3
Subnet Mask, 3-106
Alternate Destination
DLCI, 3-73
EDLCI, 3-74
Link, 3-73
Annex A and D
LMI Protocol, 3-65
ANSI Performance Report Messages, 3-40, 3-51
ANSI T1.403 Annex B FT1 Channel Loopback, 6-32
ARP
inverse, 1-3
Proxy, 3-98
assign
DSX-1 time slots, 3-57
frame relay time slots, 3-56
synchronous data port, 3-63
time slots and cross connections, 3-55
assigning
community names and access levels, 4-10
DLCIs to a Backup Group, 3-23
At-a-Glance report, 9-6
authentificationFailure trap, B-9
Auto Backup
Criteria, 3-107
restricting, 3-22
Auto-Configuration, 1-4, 2-4
Active, 5-20
setting up, 3-13
availability
LMI and PVC, 1-8