Resetting the unit and restoring communication, Resetting the unit from the control menu, Resetting the unit by cycling the power – Paradyne 9128-II User Manual
Page 239: In chapter 6, Troubleshooting
6. Troubleshooting
9128-A2-GB20-60
April 2002
6-3
Resetting the Unit and Restoring Communication
You can reset the unit in one of four ways:
T
Reset it from the Control menu.
T
Cycle the power.
T
Reset the configuration options for the COM port, or reload the factory default
settings.
T
Set the appropriate MIB object from NMS (see your NMS documentation).
The unit performs a self-test when it is reset.
Resetting the Unit from the Control Menu
Use this procedure to initiate a reset and power-on self-test of the unit.
Procedure
To reset the unit from the Control menu:
1. From the Main Menu screen, select Control.
2. Select Reset Device and press Enter. The
Are You Sure?
prompt appears.
3. Type y ( Yes) and press Enter. The unit reinitializes itself, performing a self-test.
Resetting the Unit By Cycling the Power
Disconnecting, then reconnecting the power cord resets the unit.