Traps: linkup and linkdown, B-10 – Paradyne 9128-II User Manual

Page 332

Advertising
background image

B. SNMP MIBs and Traps, and RMON Alarm Defaults

B-10

April

2002

9128-A2-GB20-60

Traps: linkUp and linkDown

These traps are supported on the following interfaces:

T

Network, DSX-1, and synchronous data ports – Physical sublayer interfaces

T

Frame relay logical link layer interfaces

linkUp and linkDown variable-bindings are in

Table B-6, linkUp and linkDown

Variable-Bindings

.

Physical and logical sublayers are represented by the entry in the MIB II Interfaces
Table. It is supported by a combination of the Frame Relay Extension MIB and
either the Frame Relay Services MIB or the Frame Relay DTEs MIB.

Table B-5.

linkUp and linkDown Traps

Trap

What It Indicates

Possible Cause

linkDown

A failure in one of the
communication interfaces
has occurred.

A failure in one of the
communication interfaces has
occurred.

linkUp

One of the failed
communication interfaces is
up and operational.

One of the failed communication
interfaces is up and operational.

Advertising
This manual is related to the following products: