Paradyne 9128-II - Manual (Page 59)

3. Configuration
9128-A2-GB20-60 April 2002 3-25
Configuration Option Tables
Configuration option descriptions contained in this chapter are in menu order, even
though this may not be the order in which you access each when configuring the
unit.
The following configuration option tables are included:
T Table 3-1, System Frame Relay and LMI Options
T Table 3-2, Class of Service Definitions
T Table 3-3, Code Point Definitions
T Table 3-4, Service Level Verification Options
T Table 3-5, General System Options
T Table 3-6, Network Physical Interface Options
T Table 3-7, Data Port Physical Interface Options
T Table 3-8, DSX-1 Physical Interface Options
T Table 3-9, ISDN BRI DBM Physical Interface Options
T Table 3-10, ISDN PRI DBM Physical Interface Options
T Table 3-11, ISDN Link Profile Options
T Table 3-12, Signaling and Trunk Conditioning Values (when Assigning
DSX-1-to-Network Time Slots/Cross Connections)
T Table 3-13, Interface Frame Relay Options
T Table 3-14, DLCI Record Options
T Table 3-15, PVC Connection Options
T Table 3-16, IP Path List
T Table 3-17, Node IP Options
T Table 3-18, Management PVC Options
T Table 3-19, General SNMP Management Options
T Table 3-20, Telnet and FTP Session Options
T Table 3-21, SNMP NMS Security Options
T Table 3-22, SNMP Traps and Trap Dial-Out Options
T Table 3-23, Ethernet Port Options
T Table 3-24, Communication Port Options
T Table 3-25, Modem Port Options
T Table 3-26, Auto Backup Criteria Options