Oki 5300 Plus - Manual (Page 23)

10 Introduction
1 7 Alarm indicator: This indicator glows red and an alarm
sounds to notify you of any problem that occurs.
Check the display panel for an explanation of the
problem. To turn the alarm indicator off, press the
Stop key and correct the problem.
1 8 Stop key: This key cancels the operation currently in
progress and turns off the Alarm Indicator. After
loading paper, installing a new toner cartridge, or
correcting an alarm condition, press this key to turn
off the Alarm Indicator. While you are programming,
pressing the Stop key takes you back step-by-step
through the programming functions you have already
selected.
19 Start key: Press this key to initiate the operation
indicated on the display or to confirm information
you have entered into the display.
2 0 Plus key: In addition to its function as a programmable
One Touch key, this key is used for chain dialing,
which allows you to dial a number using any
combination of One Touch keys, Auto Dial numbers,
and the numeric keypad. When programming a
chain dial number into a One Touch key or Auto
Dial number, press the Plus key at the end of the
first part of the number to indicate that this is a
chain dial number. See page 32 for details.
• On the OKIFAX 5300 Plus, the Plus key is
One Touch key 13.
• On the OKIFAX 5600 Plus, the Plus key is
One Touch key 13 and 28.
21 Space key: Use this key on the One Touch Keypad to
enter spaces while programming. Unlike the Pause
and Hyphen keys, spaces are used for easier reading
only and have no effect on dialing.
• On the OKIFAX 5300 Plus, the Space key is
One Touch key 14.
• On the OKIFAX 5600 Plus, the Space key is
One Touch key 14 and 29.
22 Pause key: Use this key on the One Touch keypad to
enter automatic 3-second pauses in dialing when
programming telephone numbers. Pauses in tele-
phone numbers are marked by a “P” symbol.
• On the OKIFAX 5300 Plus, the Pause key is
One Touch key 15.
• On the OKIFAX 5600 Plus, the Pause key is
One Touch key 15 and 30.