Oki 5300 Plus - Manual (Page 27)

14 Installation
Installation
Getting Started
To install your new OKIFAX, follow the instructions
from Unpacking to Setting the Fax Identification. You
must complete these steps for your OKIFAX to
operate properly.
If you have purchased an option package for your
OKIFAX, refer to the documentation you received
with that option for installation instructions.
Where to Install Your OKIFAX
■ Place your OKIFAX in a dust-free location away from
direct sunlight.
■ Allow several inches on each side of the machine to
ensure adequate ventilation.
■ Make sure that both power and telephone outlets
are available nearby.
■ Choose a location where the relative humidity is
between 20% and 80%, and where the temperature
is between 50°F (10°C) and 92°F (32°C).
Unpacking
Before you begin, be sure that all the items listed
below are included in your package.
■ OKIFAX 5300 Plus/5600 Plus
■ Toner cartridge (wrapped)
■ Image drum cartridge (inside machine)
■ Power cord
■ Telephone line cord
■ Document stacker tray
■ Quick Start Guide
Refer to the illustrations in the Component Identifica-
tion chapter.
Note: If any items are missing, contact your dealer
immediately. Keep your packing materials and carton in
case you ever need to ship or transport the unit.