Oki 5300 Plus - Manual (Page 84)

Problem Solving 71
If your OKIFAX displays “TONER LOW” or “REPLACE
TONER CART.,” replace the toner cartridge with a new
one soon. If print density is high enough, you can
continue to to use the toner cartridge without replacing
it until print quality becomes unacceptable. Keep in
mind that if you don’t replace the cartridge soon, there
is a risk that a fax will be unreadable when it prints
using an empty cartridge.
If the print density becomes low even before your
OKIFAX displays “TONER LOW” or “REPLACE TONER
CART.,” gently wipe the lens surface of the LED array
(see Step 8). If the print density does not improve,
replace the toner cartridge.
Warning: Be careful when handling the toner cartridge. Do
not let toner spill on your clothing or other porous materi-
als. Use cold water to clean up spilled toner; hot water
causes the stain to set.
1 Lift the document table into an upright position.
1 ABC 2 DEF 3
GHI 4 JKL 5 MN 6
PRS 7 TUV 8 WXY 9
* OQZ 0 #
AUTO REC SEARCH
SELECT FUNCTION AUTO DIAL
HYPHEN REDIAL
COPY HOOK V. REQUEST
PHOTO EX FINE FINE STD LIGHT NORMAL DARK ALARM STOP STAR T
2 Push in the cover release buttons on the side of the
copy stacker until you hear a click. Lift the copy
stacker.
1 ABC 2 DEF 3
GHI 4 JKL 5 MN 6
PRS 7 TUV 8 WXY 9
* OQZ 0 #
AUTO REC SEARCH
SELECT FUNCTION AUTO DIAL
HYPHEN REDIAL
COPY HOOK V. REQUEST
PHOTO EX FINE FINE STD LIGHT NORMAL DARK ALARM STOP STAR T
3 Pull the blue lever on the old toner cartridge all the
way toward you. Carefully pull the old toner cartridge
out of the image drum unit. Dispose of it in the plastic
bag you received with your new cartridge
1 ABC 2 DEF 3
GHI 4 JKL 5 MN 6
PRS 7 TUV 8 WXY 9
* OQZ 0 #
AUT O REC SEARCH AUTO DIAL
HYPHEN REDIAL
COPY HOOK V. REQUEST
PHOTO EX FINE FINE STD LIGHT NORMAL DARK ALARM STOP STAR T
4 Remove the new toner cartridge from its package and
gently shake it from side to side to distribute the toner.
Then carefully peel the white plastic tape from the
bottom of the toner cartridge.