Oki 5300 Plus - Manual (Page 32)

Installation 19
6 Insert the end of the cord into the TEL 1 or TEL 2 jack
on the back of the OKIFAX.
Note: The two TEL jacks are provided to allow you to
connect both an external handset and an answering
machine.
Connecting an External Telephone or Answering Machine
Important Note: Any external telephone or answering
machine connected to the OKIFAX must be FCC and CSA
approved.
Insert one end of the telephone cord into the TEL 1 or
TEL 2 jack on the back of the OKIFAX, and the other
end into the jack in your external device.
To connect both an answering machine and a
telephone, first connect your answering machine to your
OKIFAX, then plug your external telephone’s cord into
the telephone jack on your answering machine.
Note: You must have the TAD mode feature turned on for
an answering machine to work with your OKIFAX. See Set-
ting the Answering Mode, page 22.
Connect Power
1 Make sure the power switch is off.
2 Plug the power cord into the back of the unit.
Tel 1, Tel 2
Wall jack
LINE
Jack TEL
Jack
Line
TEL 1
TEL 2