Oki 5300 Plus - Manual (Page 71)

58 Customizing
6 Press the Yes
ᮤ key. The display changes to
SETUP FAX RING
CALL FAX NUMBER NOW.
7 Using a separate telephone line, dial the
number assigned to the OKIFAX within 90
seconds—if you don’t have access to a second
line, have someone else make the call for you.
When your OKIFAX begins to ring, it automati-
cally detects and remembers its assigned ring
pattern. Be sure to let it ring until either
RESULT=OK or RESULT=NG displays. When the
OKIFAX has sucessfully finished programming
its ring pattern, the display shows RESULT=OK.
Note: Occasionally, your OKIFAX may not be able to
detect its ring pattern on the first try. If this hap-
pens, the display shows RESULT=NG. Follow the in-
structions again from Step 6.
8 Press the Yes
ᮤ key to confirm your selection.
9 Press the Select Function key to finish.
13 1'ST PAPER SIZE: This function allows you to specify
the size of paper you are using in the paper tray.
Available settings are LETTER (default), A4, LEGAL
13, LEGAL 14, and OTHER.
Using the OTHER setting: When using the OKIFAX
as a PC printer, you can load A5 and B5 size paper
into the paper tray. However, reports and standard
size faxes (letter, legal, or A4) will not print com-
pletely on these paper sizes. Select the OTHER set-
ting when you have these or other smaller sizes
loaded; this prevents faxes and reports from printing
partially. When OTHER is selected, faxes are stored
in the OKIFAX and only print when you have
loaded a standard paper size and changed the 1'ST PA-
PER SIZE setting to match the paper loaded.
Important:
■ If you use the OTHER setting, be sure to reset
your OKIFAX to a standard paper size as soon as you are
finished. Otherwise you cannot receive faxes.
■ Keep in mind that when you select OTHER,
power outage reports do not print—this is the only
notification that power to the OKIFAX has been
disrupted.
1 4 2'ND PAPER SIZE: This function allows you to
specify the size of the paper you are using in the
optional second paper tray, and only appears if that
option is installed. See setting 13 for details.
1 5 USER LANGUAGE: This function allows you to switch
between the two languages programmed into your
OKIFAX. Available settings are ENG. (English, the
default) and SPA. (Spanish), FRE. (French), or POR.