Oki 5300 Plus - Manual (Page 68)

Customizing 55
Customizing OKIFAX 5300 Plus/
5600 Plus
Customizing Fax Features and Operations
Many of your OKIFAX 5300 Plus/5600 Plus’s fea-
tures and functions have settings which can be
changed to customize its operation. The user func-
tions control a broad range of features, such as when
certain reports print, and how the OKIFAX responds
to incoming calls. The dial parameters control how
the OKIFAX dials fax numbers; in most cases, the
settings are determined by the type of phone ser-
vice you have.
Viewing Your Current Settings
The configuration report lists the current settings of
all user functions, among other things—see page 62
for details.
To print a configuration report:
1 Press the Select Function key.
2 Press the 6/Report Print One Touch key.
The display shows 1:ACTIVITY REPORT.
3 Using the numeric keypad, press 4.
The display shows 4:CONFIGURATION.
4 Press the Yes
ᮤ
key. The report prints.
User Function Settings
User function settings allow you to customize the
general operation of your OKIFAX. Refer to the
following User Function Settings List to determine
which settings you may need to change, then refer
to Changing Your User Function Settings (page 60)
to make the change.
User Function Settings List
0 1 MCF(SINGLE-LOC.): This function automatically prints
a Message Confirmation Report after each single-lo-
cation transmission or polling transmission. The re-
port provides information about the transmission—
see page 63 for details. Available settings are ON
and OFF (default).