Oki 5300 Plus - Manual (Page 24)

Introduction 11
The One Touch Keypad
The One Touch keys are your OKIFAX’s most im-
portant tool. Use them for quick, one-touch dialing,
and to access most functions and programming op-
tions.
Using the One Touch Keys for Dialing
To use a One Touch key for dialing, just press the
appropriate One Touch key. For each key, you can
program up to two telephone numbers: a primary
number, which will always be dialed first, and an
optional alternate number which will be automati-
cally dialed if the first number is busy or if there is
no answer. You can also use the Search key to find
locations programmed into One Touch keys.
One Touch Keys available:
• The OKIFAX 5300 Plus has keys 1–15 available.
• The OKIFAX 5600 Plus has keys 1– 15 available on
the main One Touch panel, and keys 16–30
available beneath the main One Touch panel.
To access One Touch keys 16–30 on the OKIFAX 5600
Plus:
• Lift up the main One Touch keypad by the latch
(on the left side of the cover). This lets you use
keys 16–30.
• When you’re finished, close the keypad to continue
normal operation and programming.
Using the One Touch Keys for
Selecting Functions and Programming
Use One Touch keys 1–10 for selecting special trans-
mission and reception functions, for obtaining re-
ports, and for quick access to programming func-
tions.
To select a function:
1 Press the Select Function key.
2 Press the corresponding One Touch key.
1/Delayed TX key: Use this key to send a fax at a later
time and date which you specify (within three
days). See page 43.
2/Broadcast Feeder TX key: Use this key to send a fax to
multiple locations (page 45) or to switch from