Oki 5300 Plus - Manual (Page 56)

Faxing: Advanced Operations 43
Sending a Fax at a Later Date and Time
Your can program your OKIFAX up to three days in
advance to send documents at a specified date and
time.
You can send one delayed fax at a time either from
the document feeder or from memory. Refer to the
table below to decide which method you want to
use.
Delayed TX Features From From
and Limitations Feeder Memory
Number of locations One Multiple
Number of delayed faxes One OKIFAX 5300
loaded into your OKIFAX Plus: up to 5:
at one time OKIFAX 5600
Plus: up to 20
OKIFAX can be used for No Yes
other transmissions while a
delayed fax is waiting to be sent?
Note: The OKIFAX 5300 Plus sends from the feeder by default.
The OKIFAX 5600 Plus sends from memory by default. To
change the default setting, see “Mem./Feeder SW.”, page
56.
Sending a Delayed Fax from the Document Feeder
1 Load your documents.
2 Press the Select Function key.
3 Press the 1/Delayed TX One Touch key. The
display shows DELAYED TX and today’s date.
4 If the transmission is to occur on the same day, skip
to step 6. Otherwise, press the No
ᮣ
key. The
display shows PRG. START DATE 0-9.
5 Using the numeric keypad, enter the date you wish
the transmission to begin—up to three days in
advance.
6 Press the Yes
ᮤ key. The display shows PRG.
START TIME 0-9.
7 Using the numeric keypad, enter the time you wish
the transmission to begin, in 24-hour format—8:00
AM
is 08:00; 8:00
PM
is 20:00.
8 Press the Yes
ᮤ key. The display shows FEEDER TX
(OKIFAX 5300 Plus) or BROADCAST/MEMORY TX (OKIFAX
5600 Plus).
9 OKIFAX 5300 Plus: Press the Yes ᮤ key.
Faxing: Advanced Operations