Oki 5300 Plus - Manual (Page 37)

24 Installation
To Do This Use
Enter numbers Numeric keypad (press once)
Enter spaces 14/Space One Touch key
Enter hyphens Hyphen key
Enter alphabet characters Locate the character you want on the
numeric keypad. Press that key repeatedly
until the character appears on the display
Enter a unique character Press the 0/Unique key repeatedly until
the character you want appears on the
display. The following characters are
available: ! # & ‘ ( ) * + , - . / : ; = ? · д Я
с ц ь Ж Е Ш ж е ш
Enter two successive Press the No ᮣ key to move to the
letters/numbers using next character
the same key
Move the cursor to Yes ᮤ and No ᮣ keys
make corrections
8 Press the Start key to save your entry. The display
shows NO=<CALL BACK NO.>.
9 After the display clears, use the numeric keypad to
enter the telephone number for call back messages.
Enter up to 20 characters.
Tip: Use the 14/Space One Touch key to enter spaces.
1 0 Press the Start key to save your entry.
1 1 Press the Select Function key to finish.
To program your Fax ID:
1 Press the Select Function key.
2 Press the 9/User Program One Touch key. The
display shows 1:FUNC. PROGRAMMING.
3 On the numeric keypad, press 4. The display shows
4:SYSTEM DATA PRG.
4 Press the Yes
ᮤ key. The display shows NO=<TSI/
CSI>, ID=<SENDER ID>.
5 After the display clears, enter the full telephone
number of your OKIFAX using the numeric
keypad.
Note: use the Hyphen key to enter a “+” character for
international numbers, and use the Space One Touch
key to enter spaces.
6 Press the Start key to save your entry.
7 Enter your Sender ID. This is a descriptive title up to
32 characters long. Refer to the instructions below.