Oki 5300 Plus - Manual (Page 38)

Installation 25
Setting the Language
Your OKIFAX comes with two languages in-
stalled—English and Spanish, French or Portu-
guese, depending on where you bought your
unit—which appear on the display and in re-
ports. Follow the instructions below to switch
languages.
1 Press the Select Function key.
2 Press the 9/User Program One Touch key. The
display shows 1:FUNC. PROGRAMMING.
3 Press the Yes
ᮤ key. The display shows
FUNCTION NO. [ ]
ENTER 01-23.
4 Using the numeric keypad, enter 15. The display
shows USER LANGUAGE.
5 Press the No
ᮣ
key to switch to the other installed
language.
6 To accept the language change, press the Yes
ᮤ
key.
7 Press the Select Function key to finish.
Setting the Forwarding Number
For OKIFAX 5600 Plus only. When your OKIFAX
5600 Plus’s answering mode is set to Fax Forwarding
[FWD], it receives fax messages into memory and
then automatically resends it to another location—a
useful feature if you are travelling. You must
program a forwarding number before you can set
the OKIFAX 5600 Plus to Fax Forwarding mode.
1 Press the Select Function key.
2 Press the 9/User Program One Touch key. The
display shows 1:FUNC. PROGRAMMING.
3 Using the numeric keypad, press 6. The display
shows 6:FORWARDING NO. PRG.
4 Press the Yes
ᮤ key. the display shows
ຜNO=<FORWARDING NO.>.
5 After the display clears, enter the fax number you
want your messages forwarded to.
To Do This Use
Enter numbers Numeric keypad (press once)
Enter spaces Space One Touch key
Enter hyphens Hyphen key
Enter pauses (i.e., to wait Pause key
for long distance or
outside lines
Move the cursor to Yes ᮤ and No ᮣ keys.
make corrections.