Zebra Technologies P1013372-001 REV. A - Manual (Page 115)

Cleaning
Cleaning the Laminator
P1013372-001 Rev. A Zebra ZXP Series 8 Card Printer with Laminator 111
Cleaning the Laminator
Initiate the cleaning process:
Step 1. Press the MENU button on the Operator Control Panel (OCP). The OCP will
display the Main Menu.
Step 2. Scroll through the Main Menu, and select Advanced Settings. The OCP will
display the Advanced Settings Menu.
Step 3. Scroll through the Advanced Settings Menu, and select Clean Printer. The OCP
will display the Clean Printer Menu.
Cleaning: Laminator
The default cleaning interval is once every 5000 cards.
Step 1. Select Clean Laminator to run the Laminator Cleaning Routine.
Step 2. Use the Laminator Cleaning Card in the Laminator Cleaning Kit.
Step 3. Follow the OCP instructions.
Step 4. When complete, the OCP will return to the Clean Printer Menu.
Note • To order a Laminator Cleaning Kit, see the Media List on the User Documentation
and Drivers CD supplied with this printer.