Zebra Technologies P1013372-001 REV. A - Manual (Page 96)

92 Zebra ZXP Series 8 Card Printer with Laminator P1013372-001 Rev. A
ZXP Series Toolbox
Configuration
Save/Restore
When you set up a printer, you can save the printer and driver configuration settings; then,
when you restore or add additional printers, you can use the saved configuration to ensure
configuration consistency.
Note that the Saved/Restored Settings (circled below) are for the Printer.
• The Save buttons save the Driver Settings and/or Printer Settings in an XML file format.
- The printer configuration settings are stored as P_<filename>
- The driver configuration settings are stored as D_<filename>
• The Restore buttons restore the Driver Settings and/or Printer Settings saved in the XML
file format above.
1. Click on the Restore button, and observe the list of files in the browser window.
2. Select the desired file, and click on the Open button.
3. The configuration settings will be restored and displayed.
Note • The configuration files are stored in an XML format in the following default location:
C:\Documents and Settings\All Users\ZMotif\Config