Zebra Technologies P1013372-001 REV. A - Manual (Page 59)

Operation
Operator Control Panel (OCP)
P1013372-001 Rev. A Zebra ZXP Series 8 Card Printer with Laminator 55
Printer Menu Information
Info Menu
• Press the PREV button to move up the menu list
• Press the NEXT button to move down the menu list
• Press the EXIT button to return to the Operating Mode Display
PRINTER INFO
NETWORK INFO
RIBBON INFO
FILM INFO
PRINTHEAD USAGE
CONFIGURATION INFO
TEMPERATURE INFO
Displays MCB FW Ver, HCB FW Ver, MAB FW Ver, MSN (Machine Serial Number),
and PH S/N (Printhead Serial Number)
Displays DHCP, IP, Mask, GW, and MAC
Displays P/N, Type, # Images, and % Remaining
Displays P/N, Type, # Images, and % Remaining
Displays Card Count and Printhead Lines
Lists RAM, Single or Dual Sided, and Options Installed: Mag, Encoder, Laminator
Displays Settings: Top and Bottom temperature; and Current: Top and Bottom temperature
INFO Button
(Operating Mode Display)
LAMINATOR INFO Displays LCB, MAB, Sides (single or dual), Top installed (yes/no), Bottom installed (yes/no)
TOP LAMINATE INFO Displays P/N, Type, # Images, and % Remaining
BTM LAMINATE INFO Displays P/N, Type, # Images, and % Remaining
LAM TEMPERATURE INFO Displays Settings: Top and Bottom temperature; and Current: Top and Bottom temperature
LAMINATOR ODOMETER Unit on (# days), Top on (# days), Bottom on (# days), # Laminated, # Processed
Info Menu
PREV NEXT EXIT