Zebra Technologies P1013372-001 REV. A User Manual
Page 43
Installation and Setup
Installing the Windows Printer Driver
P1013372-001 Rev. A
Zebra ZXP Series 8 Card Printer with Laminator
39
Step 17. The Congratulations window will appear.
Step 18. At this point, turn on your printer; and then click the Next button. The Windows
New Hardware Found wizard will find the printer.
Step 19. When the InstallShield Wizard Complete window appears, select the Yes, I want to
restart my computer now radio button; and click the Finish button.
Step 20. This completes USB driver installation.
Step 21. To use the Printer, you would select it just like you would any other printer connected
to a Windows system.
Note •
You may need to change the card setup (card type, orientation, etc.), encoding, and/or
black panel settings via the Printer Driver;