Zebra Technologies P1013372-001 REV. A - Manual (Page 174)

170 Zebra ZXP Series 8 Card Printer with Laminator P1013372-001 Rev. A
Setting Custom Card Specifications
Adjustments
Step 2. Decrease Back Transfer Temperature:
a. Go to the Card Specifications window.
b. Make a note of the default back transfer temperature settings.
c. Decrease the appropriate (single or double side) back transfer temperature by 5.
d. Click on the OK button.
e. Print a test card.
f. Examine the test card.
• If there is noticeable improvement, continue decreasing the back transfer
temperature by 5, printing a test card, and examining the resulting card. Stop
when the problem is corrected or there is no more improvement. If the
problem is corrected, no more adjustment is required. If the problem persists,
contact Zebra Technical Support.
• If there is no noticeable improvement, return the back transfer temperature to
its default setting; and contact Zebra Technical Support.