Zebra Technologies P1013372-001 REV. A - Manual (Page 84)

80 Zebra ZXP Series 8 Card Printer with Laminator P1013372-001 Rev. A
Printer Settings and Adjustments
Card Printer Printing Preferences
Encoding Tab
The Encoding screen allows the user to set various magnetic and smart card encoding options.
To access the Encoding Tab, select Start > Printers and Faxes. Right click on the Zebra ZXP
Series 8 Card Printer listing; and select Printing Preferences > Encoding.
Although these options are user-selectable, they are set automatically when the Card Type is
selected in the
Card Setup Tab on page 73 .
• Magnetic encoder verification: When selected, the protocol is (1) Write mag data;
(2) Verify mag data; (3) If this fails, verify again; (4) If the second verify fails, rewrite and
verify; (5) If this cycle fails, eject the card.
• Magnetic encoding type: Selections are ISO, AAMVA, CUSTOM, and BINARY; for
details see
Magnetic Encoding Type on page 195 .
The Restore Defaults button restores Encoding default values.
Note • For advanced settings, see Section 5 , ZXP Series Toolbox .