Zebra Technologies P1013372-001 REV. A - Manual (Page 5)

P1013372-001 Rev. A Zebra ZXP Series 8 Card Printer with Laminator 1
1
Introduction
This manual contains installation and operation information for the Zebra P810i & P820i Card
Printer manufactured by Zebra Technologies Corporation.
Zebra ZXP Series 8 Card Printers are available without lamination, or with a single- or dual-
side lamination. The Single-Sided Laminator lays down and seals a laminating film on the top
surface of the printed card for added security; the Dual-Sided Laminator lays down and seals
laminating film on both the top and bottom surfaces of the printed card. A variety of
Laminating Films are available for specific uses; see the ZXP Series 8 Media List.
This User’s Manual describes dual-sided ZXP Series 8 Card Printers with either a single- or
dual-sided Laminator. ZXP Series 8 Card Printers that do not include lamination are described
in Zebra ZXP Series 8 Card Printer User’s Manual P1011091-xx1.
References to “the laminator” in this document apply to either the single-sided or the dual-
sided Laminator.