Installing the card hoppers, Input hopper, Output hopper – Zebra Technologies P1013372-001 REV. A User Manual

Page 14

Advertising
background image

10

Zebra ZXP Series 8 Card Printer with Laminator

P1013372-001 Rev. A

Installation and Setup

Installing the Card Hoppers

Installing the Card Hoppers

Input Hopper

The Input Hopper is positioned on the right side of the Printer and holds the cards to
be printed.

Step 1.

Install the Input Hopper by sliding the hopper into the receptacle on the right side
of the Printer.

Step 2.

Ensure that the Input Hopper locks securely in place.

Output Hopper

The Output Hopper is positioned on the left side of the Printer and receives the printed cards.

Step 1.

Install the Output Hopper by inserting the four tabs on the right side of the hopper
into the four slots on the left side of the Printer.

Step 2.

Ensure that the Output Hopper locks securely in place.

Advertising