Zebra Technologies P1013372-001 REV. A - Manual (Page 81)

Printer Settings and Adjustments
Card Printer Printing Preferences
P1013372-001 Rev. A Zebra ZXP Series 8 Card Printer with Laminator 77
• Uv printing options: Note that Rotate 180
o
, Grayscale, and Halftone are enabled when
Bitmap based Uv varnish (see above) is selected.
- Rotate 180
o
- Grayscale
- Halftone
• Double pass: Use this option to optimize the quality of the Uv image. This is a two-step
process: 1) print and transfer the card without the Uv image, 2) print and transfer the
card a second time with the Uv image only, on top of the existing print image. Note that
this option uses an additional transfer panel.
• Bitmap-based Uv varnish: This option is enabled when Bitmap based Uv varnish (see
above) is selected. To locate the bitmap, click on the Browse button to bring up a dialog
for choosing the file.
• Area manager: Note that this option is enabled when either the Defined areas or the
Undefined areas radio button is selected. A defined area is a zone.
- Orientation: Set the card orientation to either Portrait or Landscape.
- Units: Set the units to either inches or mm (millimeters)
- Area: Use to define, select, move, or resize a zone; use to draw a zone; and
use to delete a selected zone.
To create a zone, “drag” the cursor diagonally across the card area (dashed outline) to
define the location of the zone. Note that multiple zones can be defined. Dimensions are
referenced to the upper-left corner of the card.
The Restore Defaults button restores Advanced Black Panel Options default values.