Zebra Technologies P1013372-001 REV. A - Manual (Page 152)

148 Zebra ZXP Series 8 Card Printer with Laminator P1013372-001 Rev. A
Setting Custom Card Specifications
Adjustments
Step 3. Decrease Transfer Output Speed
a. From the Card Specifications window, make a note of the default transfer output
speed settings.
b. Decrease the appropriate (single or double) transfer output speed by 0.2.
c. Click on the OK button.
d. Print a test card.
e. Examine the test card.
• If there is noticeable improvement, continue decreasing the transfer output
speed by 0.2, printing a test card, and examining the resulting card. Stop
when the problem is corrected or there is no more improvement. If the
problem is corrected, no more adjustment is required. If the problem persists,
contact Zebra Technical Support.
• If there is no noticeable improvement, return the transfer output speed to its
default setting; and contact Zebra Technical Support.