Zebra Technologies P1013372-001 REV. A - Manual (Page 154)

150 Zebra ZXP Series 8 Card Printer with Laminator P1013372-001 Rev. A
Setting Custom Card Specifications
Adjustments
Step 2. Decrease Transfer Input Speed
a. From the Card Specifications window, make a note of the default transfer input
speed settings.
b. Decrease the appropriate (single or double) transfer input speed by 0.2.
c. Click on the OK button.
d. Print a test card.
e. Examine the test card.
• If there is noticeable improvement, continue decreasing the transfer input
speed by 0.2, printing a test card, and examining the resulting card. Stop
when the problem is corrected or there is no more improvement. If the
problem is corrected, no more adjustment is required; otherwise go to
Step 3 .
• If there is no noticeable improvement, return the speed to its default setting;
and go to Step 3 .