Zebra Technologies P1013372-001 REV. A - Manual (Page 178)

174 Zebra ZXP Series 8 Card Printer with Laminator P1013372-001 Rev. A
Setting Custom Card Specifications
Adjustments
Step 4. Increase Transfer Input Speed
a. From the Card Specifications window, make a note of the default transfer input
speed settings.
b. Increase the appropriate (single or double) transfer input speed by 0.2.
c. Click on the OK button.
d. Print a test card.
e. Examine the test card.
• If there is noticeable improvement, continue increasing the transfer input
speed by 0.2, printing a test card, and examining the resulting card. Stop
when the problem is corrected or there is no more improvement. If the
problem is corrected, no more adjustment is required. If the problem persists,
contact Zebra Technical Support.
• If there is no noticeable improvement, return the transfer input speed to its
default setting; and contact Zebra Technical Support.