Zebra Technologies P1013372-001 REV. A User Manual
Page 45
Installation and Setup
Installing the Windows Printer Driver
P1013372-001 Rev. A
Zebra ZXP Series 8 Card Printer with Laminator
41
Step 8.
In the Welcome window, choose the maintenance operation to be performed:
a.
Select Modify to upgrade the older printer driver, click the Next button, and
follow the screen prompts. At the end of the upgrade process, you will be asked
to re-boot your computer. Re-boot your computer. The upgrade is complete.
b.
Select Remove to remove the older printer driver, click the Next button, and
follow the screen prompts. At the end of the uninstall process, you will be
asked to re-boot your computer. Re-boot your computer, and start over
with
Step 9.
The InstallShield Wizard window will open. To proceed with the installation, click
the Next button.
Step 10. Select Install Ethernet printer drivers, and click the Next button.