Zebra Technologies P1013372-001 REV. A - Manual (Page 181)

Setting Custom Card Specifications
Adjustments
P1013372-001 Rev. A Zebra ZXP Series 8 Card Printer with Laminator 177
Step 3. Increase Transfer Input Speed
a. From the Card Specifications window, make a note of the default transfer input
speed settings.
b. Increase the appropriate (single or double) transfer input speed by 0.2.
c. Click on the OK button.
d. Print a test card.
e. Examine the test card.
• If there is noticeable improvement, continue increasing the transfer input
speed by 0.2, printing a test card, and examining the resulting card. Stop
when the problem is corrected or there is no more improvement. If the
problem is corrected, no more adjustment is required. If the problem is
corrected, no more adjustment is required; otherwise go to
Step 4 .
• If there is no noticeable improvement, return the transfer input speed to its
default setting; and go to Step 4 .